
TP-Link
0,00 ₼
| 1× Gigabit Ethernet Port |
| Reset, LED |
| 100-240 V ~ 50/60 Hz |
| 18 W |
| 6.3 × 3.1 × 1.5 in (160 × 80 × 37.8 mm) |
| 4× External Antennas• 2.4 GHz: 2× 3 dBi• 5 GHz: 4× 5 dBi |
| Plug in |
| 140 ㎡ (1500 ft²)*** |
| 250+** |
| IEEE 802.11ax/ac/n/g/b/a |
| 2.4 GHz and 5 GHz |
| • 5 GHz: Up to 4804 Mbps• 2.4 GHz: Up to 574 Mbps |
| • 16 SSIDs (Up to 8 SSIDs on each band)• Enable/Disable Wireless Radio• Automatic Channel Assignment• Transmit Power Control (Adjust Transmit Power on dBm)• QoS(WMM)• Seamless Roaming§• Beamforming• Rate Limit• Load Balance• Airtime Fairness• Band Steering• Reboot Schedule• Wireless Schedule• RADIUS Accounting• MAC Authentication• Wireless Statistics• Static IP/Dynamic IP |
| • Captive Portal Authentication§• Access Control• Wireless Mac Address Filtering• Wireless Isolation Between Clients• VLAN• Rogue AP Detection• 802.1X Support• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise |
| • CE:<20 dBm (2.4 GHz, EIRP)<23 dBm (5 GHz, band1 & band2, EIRP)<30 dBm (5 GHz, band3, EIRP)• FCC:<25 dBm (2.4 GHz)<28 dBm (5 GHz) |
| Yes |
| • Omada Hardware Controller• Omada Software Controller• Omada Cloud-Based Controller |
| Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Yes |
| Yes |
| Yes |
| v1, v2c, v3 |
| Yes |
| Yes |
| CE, FCC, IC, RoHS, UL |
| • AX5400 Mesh WiFi 6 Extender EAP673-Extender • Installation Guide |
| • Operating Temperature: 0–40 ℃ (32–104 ℉)• Storage Temperature: -40–70 ℃ (-40–158 ℉)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing |
| Yes |
| Yes |
| Yes. Requiring the use of Omada Cloud-Based Controller. |
| No |